Research Articles | Challenge Journal of Structural Mechanics

Reliability design of the hinge kit system subjected to repetitive loading in a commercial refrigerator

Seong-woo Woo, Dennis L. O’Neal


DOI: https://doi.org/10.20528/cjsmec.2016.05.010
View Counter: Abstract | 1828 times | ‒ Full Article | 471 times |

Full Text:

PDF

Abstract


A newly designed hinge kit system (HKS) of a commercial refrigerator was subjected to a robust reliability methodology during the design phase of the system. This methodology included setting the overall parametric accelerated life test (ALT) plan of product and identifying failure mechanisms and modes in field.  The ALT included a sample size equation to improve several of the HKS design parameters. Reliability of the new HKS was targeted to be 10 years over B1. Failure sites in the HKS were identified through returned products from the field. The first ALT confirmed a failure that occurred at the housing of HKS. The missing design parameters of HKS housing for the refrigerator were that it had no support ribs in the original design. The supporting structure of HKS in the refrigerator was modified based on the action plan. Cracks were identified in a second ALT that was generated in the torsional shaft. Due to it having squared off corners, the HKS torsional shaft did not have not enough strength to withstand repetitive stresses. The shaft was modified as a consequence of the ALTs. The reliability of redesigned HKS is now guaranteed as B1 10 years. The design methods - load analysis and three ALTs were very effective in identifying the missing design parameters during the design phase. The robust design method presented in this paper might be applicable to the other mechanical systems.

Keywords


robustness; parameter design; load analysis; accelerated life testing

References


Ajiki T, Sugimoto M, Higuchi H (1979). A new cyclic biased THB power dissipating ICs. In: 17th Annual Proceedings Reliability Physics, 118–126.

Ashley S (1992). Applying Taguchi's quality engineering to technology development. Mechanical Engineering, 114(7), 58.

Byrne D, Taguchi S (1987). The Taguchi approach to parameter design. Quality Progress, 20(12), 19–26.

Karnopp D, Margolis D, Rosenberg R (2000). System Dynamics: Modeling and Simulation of Mechatronic Systems. John Wiley & Sons, New York.

McPherson J (1989). Accelerated Testing, Packaging, Electronic Materials Handbook. ASM International, 1, 887-894.

Phadke M (1989). Quality Engineering using Robust Design. Prentice Hall, Englewood Cliffs, New Jersey.

Ryu D, Chang S (2005). Novel concept for reliability technology. Microelectronics Reliability, 45(3), 611-622.

http://dx.doi.org/10.1016/j.microrel.2004.10.010

Taguchi G (1978). Off-line and on-line quality control systems. In: Proceedings of the International Conference on Quality Control, Tokyo, Japan.

Taguchi G, Shih-Chung T (1992). Introduction to Quality Engineering: Bringing Quality Engineering Upstream. American Society of Mechanical Engineering, New York.

Wilkins J (2000). Putting Taguchi methods to work to solve design flaws. Quality Progress, 33(5), 55-59.

Woo S, Pecht M (2008). Failure analysis and redesign of a helix upper dispenser. Engineering Failure Analysis, 15(4), 642–653.

http://dx.doi.org/10.1016/j.engfailanal.2007.10.005

Woo S, O'Neal D, Pecht M (2009a). Improving the reliability of a water dispenser lever in a refrigerator subjected to repetitive stresses. Engineering Failure Analysis, 16(5), 1597–1606.

http://dx.doi.org/10.1016/j.engfailanal.2008.10.017

Woo S, O'Neal D, Pecht M (2009b). Design of a hinge kit system in a Kimchi refrigerator receiving repetitive stresses. Engineering Failure Analysis, 16(5), 1655–1665.

http://dx.doi.org/10.1016/j.engfailanal.2008.11.010

Woo S, Pecht M, O'Neal D (2009c). Reliability design and case study of a refrigerator compressor subjected to repetitive loads. International Journal of Refrigeration, 32(3), 478-486

http://dx.doi.org/10.1016/j.ijrefrig.2008.07.006

Woo S, Ryu D, Pecht M (2009d). Design evaluation of a french refrigerator drawer system subjected to repeated food storage loads. Engineering Failure Analysis, 16(7), 2224–2234.

http://dx.doi.org/10.1016/j.engfailanal.2009.03.005

Woo S, O'Neal D, Pecht M (2010a). Failure analysis and redesign of the evaporator tubing in a Kimchi refrigerator. Engineering Failure Analysis, 17(2), 369-379.

http://dx.doi.org/10.1016/j.engfailanal.2009.08.003

Woo S, O'Neal D, Pecht M (2010b). Reliability design of a reciprocating compressor suction reed valve in a common refrigerator subjected to repetitive pressure loads. Engineering Failure Analysis, 2010, 17(4), 979-991.

http://dx.doi.org/10.1016/j.engfailanal.2009.12.001

Woo S, O'Neal D, Pecht M (2011). Reliability design of residential sized refrigerators subjected to repetitive random vibration loads during rail transport. Engineering Failure Analysis, 18(5), 1322–1332.

http://dx.doi.org/10.1016/j.engfailanal.2011.03.021

Woo S (2015). The reliability design of mechanical system and its Parametric ALT. Handbook of Materials Failure Analysis with Case Studies from the Chemicals, Concrete and Power Industries, Elsevier, 259-276.

Woo S, O'Neal D (2015). Reliability design of mechanical systems subject to repetitive stresses. Recent Patents on Mechanical Engineering, 8(4), 222-234.

http://dx.doi.org/10.2174/2212797608666150813001703

Woo S, O'Neal D (2016). Improving the reliability of a domestic refrigerator compressor subjected to repetitive loading. Engineering, 8, 99-115.

http://dx.doi.org/10.4236/eng.2016.83012

Related Articles