Related Articles

• Prediction of optimum design of welded beam design via machine learning
  Yaren Aydın, Farnaz Ahadian, Gebrail Bekdaş, Sinan Melih Nigdeli
  Challenge Journal of Structural Mechanics (2024) 10(3) 86-94
  Design optimization is an important engineering design topic. One of the important issues in structural design is to minimize the cost. This study based on an engineering problem of Welded Beam Design aims to minimize the cost of the beam with machine learning...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...
• The mechanical properties of cement mortar reinforced with silica fume subjected to sulfate and chloride environment
  Sulaiman Al-Safi, Abdulghani Altharehi, Ibrahim A. Alameri, Abdulmalek Al-Jolahy
  Challenge Journal of Structural Mechanics (2025) 11(1) 55-69
  This study investigates the effect of incorporating micro-sized silica fume on the mechanical properties and durability of cement mortar when exposed to sulfate and chloride environments. Mortar samples were prepared by replacing cement with micro-sized silica...
• The novelty design method in lightweight structures with low effective elastic modulus
  Hojjat Ghahramanzadeh Asl, Derya Karaman
  Challenge Journal of Structural Mechanics (2024) 10(2) 47-57
  Lightweight structures are of great interest in industrial areas such as automotive, aerospace, and biomedical due to their lightness, and superior mechanical performance. The advantages of lightweight structures are increased with the spread of additive manuf...
• Optimum design of reinforced concrete beam sections with JAYA algorithm
  Yasin Duysak, Sinan Melih Nigdeli, Gebrail Bekdaş
  Challenge Journal of Concrete Research Letters (2024) 15(4) 134-141
  Section design is an important process for designing reinforced concrete structures because of the existence of factors such as bearing capacity and cost. After defining the initial cross sections for reinforced concrete elements, reinforcement amounts are cal...