Email this article The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).
If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.
Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.
Related Articles
-
Demet YavuzChallenge Journal of Structural Mechanics (2024) 10(4) 138-148Pervious concrete can rapidly drain stormwater from the top layer to the sublayer. However, the porous structure of this concrete also results in low mechanical properties, which prevent the widespread use of pervious concrete around the world. This study inve...
-
Rajappan Preetha, Kalpana Kumari, Balakrishnan Sakthi, Chandrasekharan Nair Harikumar, Haneef Ibrahim Abdul GaniChallenge Journal of Concrete Research Letters (2023) 14(1) 18-30The case study pertains to the methods such as nondestructive, semi-destructive, chemical, electrochemical and micro-analytical, utilized to assess the cause of cracking and spallation of a reinforced concrete building near to the eastern coastline of India. C...
-
Mahyar Maali, Merve Sağıroğlu, Mahmut Kılıç, Abdulkadir Cüneyt AydınChallenge Journal of Structural Mechanics (2022) 8(4) 133-140This paper investigates new bolted and welded beam-to-column connection types on the cold-formed steel sections (CFS) and their behaviors determined using full-scale experiments. This study aimed to analyze the influence of weld/bolt connections based on CFS p...
-
Yeşim Tarhan, İsmail Hakkı Tarhan, Arnaud PerrotChallenge Journal of Structural Mechanics (2025) 11(2) 99-1053D printing technology has transformed the construction industry by enabling rapid and cost-effective production of complex geometries. However, it faces significant challenges, including sustainability concerns due to cement's environmental impact and reinfor...
-
Lyubomir A. ZdravkovChallenge Journal of Structural Mechanics (2024) 10(3) 101-108The silos and vertical cylindrical tanks of small volumes are often built in batteries, at short distances between them. As a result of their close location, the wind load on them increases. In the European standard EN 1991-1-4:2005+A1:2010 exists a methodolog...
