Cover & Contents Vol.15 No.2

Full Text:

Related Articles

• The impact of openings on ferrocement I-beams: a study on metallic and non-metallic mesh reinforcement
  Ghada Mousa Hekal, Ayman Magdy Moawad Elshaboury, Yousry B. I. Shaheen
  Challenge Journal of Concrete Research Letters (2024) 15(2) 30-46
  The primary objective of this investigation is to assess the influence of openings on the structural performance of ferrocement I-beams, incorporating diverse metallic and non-metallic mesh reinforcements. Sixteen beams underwent testing utilizing a four-point...
• Effect of resin amount on the damping properties of polymer concrete
  Arif Ulu
  Challenge Journal of Concrete Research Letters (2024) 15(2) 47-55
  In the construction and infrastructure sector, efforts are being made to find faster and more efficient materials. Polymer concrete (PC) challenges traditional concrete with its fast setting, durability and abrasion resistance. While studies on PC strength are...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
• Tea waste ash: Characterization, pozzolanic activity and effects on the fresh properties of cement pastes
  İlknur Bekem Kara, Cuma Kara
  Challenge Journal of Concrete Research Letters (2025) 16(2) 51-59
  It is a well-known fact that the use of agricultural wastes in cementitious composites by turning them into ash provides both ecological and economic benefits. Tea factories in Türkiye are located in the Eastern Black Sea region. Tea waste generated in factori...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...