Cover & Contents Vol.14 No.4

Full Text:

Related Articles

• Effect of hemp and basalt fiber on fracture energy of cement-based composites: a comparative study
  Adil Gultekin
  Challenge Journal of Concrete Research Letters (2023) 14(4) 107-117
  Fiber-reinforced composites are one of the most used construction materials. Nowadays, some types of fibers like steel, carbon, glass and basalt are commonly used in these composites. However, the production of these fibers consumes natural resources and a hig...
• An overview on the hazards and handling methods of construction and demolition wastes: Special focus on recycled concrete aggregates
  Alhamza Derki, Pınar Akpınar
  Challenge Journal of Concrete Research Letters (2023) 14(4) 118-127
  With the demand increased in construction activities within the last century, several scientific research studies have been focusing on different aspects of construction and demolishing wastes, while considering the severity of environmental problems that they...
• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
• Tea waste ash: Characterization, pozzolanic activity and effects on the fresh properties of cement pastes
  İlknur Bekem Kara, Cuma Kara
  Challenge Journal of Concrete Research Letters (2025) 16(2) 51-59
  It is a well-known fact that the use of agricultural wastes in cementitious composites by turning them into ash provides both ecological and economic benefits. Tea factories in Türkiye are located in the Eastern Black Sea region. Tea waste generated in factori...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...