Research Articles | Challenge Journal of Concrete Research Letters

Mechanical properties of self-curing concrete (SCUC)

Noha Yehia Elwakkad, Khaled Mohamed Heiza


DOI: https://doi.org/10.20528/cjcrl.2019.01.001
View Counter: Abstract | 1322 times | ‒ Full Article | 582 times |

Full Text:

PDF

Abstract


According to lack of water, labor self curing concrete (SCUC) is necessary in construction projects. In this study, it is focuses on concrete application with new admixture to achieve SCUC. The present study involves the use of shrinkage reducing admixture polyethylene glycol (PEG 400) in concrete which helps in self curing and helps in better hydration and hence strength. The effect of admixture (PEG 400) on water retention, compressive strength, split tensile strength and modulus of rupture by varying the percentage of PEG by weight of cement from 0% to 1% were studied for M1 and M2 mixes. It was found that using PEG400 with dosage 0.3%, 0.5% gives an early strength to the concrete. It was also found that 0.5% of PEG 400 by weight of cement was the optimum for both M1 and M2 mixes.


Keywords


self-curing concrete; water retention; relative humidity; hydration; absorption; water permeability

References


Bashandy AA (2015). Performance of self curing concrete at elevated temperatures. Indian Journal of Engineering & Material Sciences, 22, 93-104.

Dahyabhai PM, Pitroda JR (2014). Introducing the self-curing concrete in construction industry. International Journal of Engineering Research & Technology (IJERT), 3(3), 1286-1289.

ECCS 373 (1991). Specification for Ordinary Portland Cement. Egyptian Standards.

El-Dieb AS, El-Maaddawy TA, Mahmoud AAM (2012). Water-soluble polymers as self-curing agents in cement mixes. Advances in Cement Research, 24(5), 291-299.

Evangeline S (2014). Self curing concrete and its inherent properties. Journal of Engineering Research and Appli-cations, 4(8) (version 7), 66-71.

Heiza K, Eid F, Masoud T (2018). Light weight self compacting concrete with light expanded clay aggregate. MATEC Web Conferences, 162, 02031.

Indirajith AJ, Vishnu A (2016). Self-curing concrete – case study. International Journal of Advanced Research Trends in Engineering and Technology (IJARTET), 3(8), 8-15.

Junaid SM, Saddam S, Junaid M, Yusuf K, Huzaifa SA (2015). Self-curing concrete. International Journal of Advance Foundation and Research in Science & Engineering (IJAFRSE), 1, Special Issue, 1-7.

Kumar AS, Babu TS (2015). Effect of self curing compound on strength and durability of M25 mix concrete. Inter-national Journal of New Technology and Research (IJNTR), 1(5), 01-04.

Kumar MVJ, Srikanth M, Rao KJ (2012). Strength characteristics of self-curing concrete. International Journal of Research in Engineering and Technology (IJRET), 1(1), 51-57.

Mather B (2001). Self-curing concrete, why not? Concrete International, 23(1), 46-47.

Sundharam R, Priya M, Ranjitha S, Elakkiya RT (2016). Self-curing. International Conference on Current Research in Engineering Science and Technology (ICCREST), 111-120.

Tikalsky PJ, Mather B, Olek J (2006). Concrete Durability, A2E01: Committee on Durability of Concrete. (01/05/2006), 3 pages.

Vedhasakthi K, Saravanan M (2014). Development of normal strength and high strength self curing concrete using super absorbing polymers (Sap) and comparison of strength characteristics. International Journal of Research in Engineering and Technology (IJRET), 3(10), 310-316.


Related Articles

  • Mehmet Uzun
    Challenge Journal of Concrete Research Letters (2024) 15(3) 82-89
    In this study, we explore the possibility of using sisal fibers as an environmentally-friendly reinforcing agent for foam concrete. We aim to improve its physical properties by combining environmental friendliness with engineering practicality to create a dura...
  • Arif Ulu
    Challenge Journal of Concrete Research Letters (2024) 15(2) 47-55
    In the construction and infrastructure sector, efforts are being made to find faster and more efficient materials. Polymer concrete (PC) challenges traditional concrete with its fast setting, durability and abrasion resistance. While studies on PC strength are...
  • Sadık Alper Yıldızel
    Challenge Journal of Concrete Research Letters (2023) 14(3) 89-95
    Urbanized areas are known to have significantly higher temperatures than rural areas. The Urban Heat Island (UHI) effect is caused by surfaces such as asphalt, buildings, and other heat-absorbing surfaces that store more heat than natural vegetation. Sunlight ...
  • Awadhesh Srivastava, Abhishek Mishra, Sachin Kumar Singh
    Challenge Journal of Concrete Research Letters (2025) 16(1) 33-39
    This work presents the results of an experimental investigation into the strength and durability properties of fiber-reinforced concretes that have polypropylene (PP) fibers added to the concrete by volume and nano-SiO2 (silicon dioxide) and nano-TiO2 (titaniu...
  • Serdal Ünal, Mehmet Canbaz
    Challenge Journal of Structural Mechanics (2024) 10(4) 159-165
    This study investigated the mechanical performance of lightweight photocatalytic marbelite (LPM). In the production of LPM, titanium dioxide (TiO2) and various fiber additives were used to impart self-cleaning properties to the LPM with photocatalytic effect. ...