Cover & Contents Vol.9 No.1

Full Text:

Related Articles

• Experimental study on the mechanical performance of polypropylene fiber-reinforced concrete incorporating palm oil fuel ash as partial cement replacement
  Alaa Omar Tanash, Ahmed Mokhtar Albshir Budiea, Mohd Faizal Md Jaafar, Khairunisa Muthusamy, Fahrizal Zulkarnain
  Challenge Journal of Concrete Research Letters (2025) 16(3) 115-124
  Environmental pollution caused by the disposal of palm oil fuel ash, a type of waste from the palm oil trade, needs to be resolved. At the same time, activities involved in the manufacturing of cement, which is the primary binder in commonly used concrete, hav...
• Tea waste ash: Characterization, pozzolanic activity and effects on the fresh properties of cement pastes
  İlknur Bekem Kara, Cuma Kara
  Challenge Journal of Concrete Research Letters (2025) 16(2) 51-59
  It is a well-known fact that the use of agricultural wastes in cementitious composites by turning them into ash provides both ecological and economic benefits. Tea factories in Türkiye are located in the Eastern Black Sea region. Tea waste generated in factori...
• Effect of dimensions of specimens on the impact performance of concrete
  Mohammed Gamal Al-Hagri, Shahed Husni Ben Issa Ebribesh, Fares Alamoudi, Abdulrahman Rakan Al Haj Ali
  Challenge Journal of Concrete Research Letters (2025) 16(2) 85-94
  Mechanical properties of concrete are size dependent. While many reports have discussed the size effect of the test specimen on the static properties of concrete, research on the effect of cross-sectional dimensions of the concrete beams on its impact performa...
• Concrete strength monitoring and damage detection using piezoelectric-based wireless sensor
  Raju Narwade, Ruhita Jadhav
  Challenge Journal of Concrete Research Letters (2025) 16(1) 40-50
  Concrete stands as the predominant and extensively employed structural material in civil engineering. Timely evaluation of concrete strength is essential for maintaining structural safety and minimizing construction delays, thereby avoiding possible structural...
• Nonlinear in-plane response of 3D-printed concrete walls with varied infill patterns: Experimental mix design and numerical structural assessment
  İsmail Hakkı Tarhan, Yeşim Tarhan
  Challenge Journal of Structural Mechanics (2025) 11(3) 160-173
  This study investigates the nonlinear in-plane structural behavior of 3D-printed concrete wall elements with two representative internal infill patterns ‒ lattice (L) and triangular (T) ‒ using finite element modeling informed by experimentally derived materia...